Unit: 1 x 1 "wbfibonacci hybrid silk carbon treble;
1 x 7 "WB tactic3.0 midrange;
2 x 7 "WB tactic3.0 mid bass;
2 x 7 "WB tactic3.0 bass;
4 x 7 "WB isobaricdrive system
Impedance: 4.5 ohm
Sensitivity: 89dB on 1m axis, 2.83v input
Frequency response: 24hz-30khz + / - 2dB
Weight: 145kg / piece
In order to research and develop the latest flagship eminence, Wilson Benesch spent many years to find out the technology for making perfect full frequency unit. With the help of 3D printing and other new technologies, Wilson Benesch has achieved the effect of sharpening the sword in ten years. In its 2.5-channel design, the upward extension of the bass unit still needs to be cut off, but the downward extension of the midrange unit does not cut off, so that the downward extension of the midrange and bass is all the way down to the limit of the unit. The third generation tactic III unit is upgraded with 3D printed carbon fiber polymer Fibonacci series damper. With this special damper, the most linear full frequency unit in the world is finally produced. The semisphere tweeter is a design that Jinchi is proud of. They add special filamentous carbon fiber material into the silk film to optimize the balance between stiffness and damping characteristics, realize extremely wide high frequency response, have flexible personality, and are easy to drive and control without any rash. Tactic III baritone and tactic Although the III bass unit is also a diaphragm made of special polypropylene, the thickness of the fiber woven on the surface is different. The midrange unit is thinner, and the bass unit is thicker. This 7-inch midrange unit is a direct pass design of power amplifier. It does not go through a sound divider, and uses special mechanical sound division technology to achieve the purpose of frequency division by relying on the unit's own characteristics and speaker structure. If the midrange unit doesn't go through the sound divider, there will be no phase confusion and drift. Jinchi sets the treble frequency divider at 5KHz to achieve the minimum phase error.
All the units are designed and manufactured by ourselves. All the horn units of Jinchi use powerful neodymium magnet, which has the advantages of small volume and high magnetic beam density. In addition to the treble and midrange units, the MTM units are arranged above and below the main sound producing area. In addition to the unique carbon fiber diaphragm formula and voice coil design, they each have their own sealed box, which uses the "mechanical characteristics, natural attenuation" method to achieve the purpose of frequency division. In this way, we hope to reduce the phase drift caused by the splitter, so as to make the positioning more accurate and the timbre more transparent. With high efficiency isobaric structure, there are four shining 7-inch units under the Pope speaker. In fact, the two units above have independent airtight boxes, and the two units below have independent airtight boxes. They are isobaric push-pull matrices Tactic design allows the inner bass unit to help the outer bass unit work together to achieve superimposed energy performance.
The design of the minimalist divider makes the simplest first-order division by using only a single inductance and capacitor due to the simplification of the frequency division between the medium and the treble unit. On the one hand, it avoids phase drift, making the positioning more accurate and the sound color more transparent. The advanced 3dcad/cam system is used for the research and development of military and aerospace products. In order to achieve the ultimate performance of geometric physics and acoustics, the top of carbon fiber and the curved composite shell like sculpture art are designed by using the principle of natural acoustic arc to eliminate the interference of sound diffraction and the occurrence of standing wave inside the speaker. Finally, the sound box is like invisible in the listening room , leaving only the music and the beautiful curve. Jinchi was named the first few companies in the UK who really fully mastered carbon fiber technology, mastered the leading composite material technology, and received the financial support from the British Trade and Industry Bureau in 1989. It began a series of related research on advanced materials in sound. The unique carbon fiber alloy box structure has been famous all over the world. The carbon fiber panels on both sides of the eminence speaker are so beautiful that they are curved, with their tails resting on metal joists, and the aluminum base design of the speaker and the bottom stack is just as natural.